Current Sensor
12.7mm Toroid with Primary

POWER MAGNETICS (OLD) | Back

Current Sensor 12.7mm Toroid with Primary
CST013-PRI 50/60 Hz Series

 POWER MAGNETICS (OLD) | Back

PDF File PDF File
  • Diverse applications for overload sensing, load drop, shutdown
    and feed-back control in switch mode power supplies.
  • For use in 50/60 Hz.
  • Rated current up to 12 Amps.
  • Single primary built-in.
  • Only available in potted construction.
  • Dielectric strength of 3750 V between primary and secondary.
  • Approved for VDE/TUV.
FALCO PART
NUMBER		 RoHS Part Number L (H)1
MIN		 Freq.
(Hz)		 Turns
Ratio		 DCR
(Wmax)		 Irms max
(Amps.)
 *T50123 4.40 120 1400:1 106 5.00
 T50124 4.50 120 1500:1 120 6.00
 T50095  T50L95 13.00 120 2350:1 300 12.00



1. Inductance L tested at 0.25 V. * Tested at 1.0 V.
2. L and DCR tested at Ta=25°C


Current Sensor 12.7mm Toroid with Primary
CST013-PRI Digital Series

 POWER MAGNETICS (OLD) | Back

PDF File PDF File
  • Diverse applications for overload sensing, load drop, shutdown
    and feed-back control in switch mode power supplies.
  • For use in 20 KHz to 200 KHz.
  • Peak current 35 Amps.
  • Single primary built-in
  • Only available in potted construction.
  • Dielectric strength of 3750 V between primary and secondary.
  • Approved for VDE/TUV.
FALCO PART
NUMBER		 RoHS Part Number L (mH)1
MIN		 Freq.
(KHz)		 Turns
Ratio		 DCR
(Wmax)		 Ipk
(Amp)		 A-ms
 T50081 5.00 1.00 50:1 0.700 30.00 160
 T50082  T5L082 28.05 1.00 100:1 1.40 35.00 300
 T50125  T50L25 80.00 1.00 200:1 2.50 35.00 600
 T50083 320.00 1.00 400:1 10.00 35.00 1200
 T50084 520.00 1.00 500:1 20.60 35.00 1500




1. Inductance L tested at 0.25 V
2. L and DCR tested at Ta=25°C