Plastic Injection Molding
- Thermoplastic material
- Up to 13” wide
- Consistent quality
Core Production
- High-grade silicon steel – M3 to M6
- Up to 650mm diameter
- Rectangular and elliptical geometries
Core Annealing
- Vacuum annealing process
- 1.5 tons per cycle
Winding
- 6 AWG (4.25mm) to 32 AWG (0.22mm)
- Cores from 1.6” to 32”
- Rectangular and elliptical up to 12” wide
Testing & Verification
- IEEE, IEC and CSA standards
- Certified Test reports
- Traceability